Contact |
The ContactIdAlarm type exposes the following members.
Properties| Name | Description | |
|---|---|---|
 | AccountNumber | 4 hex digits Account number as hexadecimal string. Example: ADFF Please specify the parameters for the contact ID alarm message |
| EventCode | 3 hex digits Event code as hexadecimal string, the type of the alarm (fire, burglar, etc.) |
| EventName | A textual representation of the event code |
| EventQualifier | Types of alarm events: New Event, New Restore, Status report |
| EventQualifierValue | |
| MessageType | his 2- digit sequence is used to identify the Contact ID message to the receiver. It may be transmitted as either 18 (preferred) or 98 (optional). New receiver implementations shall accept either a 18 or a 98. Note that some older receivers may not accept 98 |
| MessageTypeValue | |
| PartitionNumber | Maximum hex 2 digits Group or Partition number as hexadecimal string. Use 0 to indicate that no specific group or partition information applies. |
| ZoneNumber | Maximum 3 hex digits Zone number as hexadecimal string. Use 0 to indicate that no specific zone or user information applies |
See Also